12 Fun Crafts Using Soda Cans

cool things to do with soda cans

As our society continues to become more environmentally conscious, recycling plays an increasingly important role in our daily lives. One material that often goes overlooked in this process is the humble soda can. However, with a little creativity, these aluminum cans can be transformed into stunning works of art. In this article, we will explore 12 fun crafts using soda cans that are sure to inspire your inner artist and help reduce your environmental impact. So, grab a can of your favorite soda and let's get started!

quartzmountain

Hanging planters

Hanging
Source: www.pillarboxblue.com

Soda cans are a ubiquitous item in many households. From soda addicts to individuals looking for a quick energy boost, soda cans have become a staple of modern life. However, did you know that there are many "cool" things that you can do with soda cans besides drinking their contents? One of the best uses for soda cans is to transform them into hanging planters. In this article, we will explore how you can use soda cans to create cool and trendy hanging planters for your home or garden.

Step One: Collect Your Materials

The first step in making hanging planters out of soda cans is to gather all the necessary items you'll need. This includes clean and empty soda cans, a pair of tin snips, a drill with a small drill bit, a measuring tape or ruler, a pencil, a safety pin, and some twine or rope. Make sure that the soda cans are thoroughly cleaned and are free from any sticky residue.

Step Two: Measure and Cut

The next step is to cut the soda cans to the desired size. Using the measuring tape, measure the height of the can, and mark this measurement with a pencil. Then, using the tin snips, cut along the line to make the top of the soda can, removing the rim. Once the top has been removed, measure around the edge of the can and mark the midpoint. Cut along this midpoint, so the can is open with a smooth edge at the top and bottom. Finally, use the drill with a small drill bit to make two holes on opposite sides of the can, just below the top edge. This is where you'll tie the twine or rope to create the hanger.

Step Three: Decorate and Plant

Now that the cans are cut and have holes for hanging, it's time to add some personality to your planters. Using the safety pin or another sharp tool, create small holes in the sides of the can to allow for drainage. This is important to ensure that your plants don't drown in excess water. Next, use acrylic paint or adhesive vinyl to decorate the cans with patterns or colors of your choosing. Finally, add a bit of soil and a plant of your choice, such as herbs, succulents, or small flowers, and hang them in a sunny spot in your home or garden.

Creating hanging planters out of soda cans is a fun and easy DIY project that can also add some style to a space. With just a few simple materials and some creativity, you can transform an everyday item into something beautiful and functional. Whether you're looking for a way to bring some greenery into your home or want to create a unique outdoor space, soda can hanging planters are a cool and unique way to do it. So why not give this DIY project a try and see what you can create?

12 Awesome Things to Do in Holmdel, NJ

You may want to see also

quartzmountain

Wind chimes

Wind
Source: www.pinterest.com

Soda cans are a common household item that are usually taken for granted. However, with a little creativity, you can transform them into amazing works of art. Wind chimes are a great way to reuse soda cans and to add a little beauty and music to your home or garden. Here’s everything you need to know to make your own soda can wind chimes.

Materials:

Empty soda cans (rinse

Thoroughly with water and let dry)

  • Scissors
  • Hole punch
  • String or fishing line
  • Beads
  • A small bell or tin can
  • Paint or glue (optional)

Instructions:

  • Cut off the top and bottom of the soda can with scissors and discard. Cut the can lengthwise and then cut out a rectangle shape so that you end up with a flat piece of aluminum. Repeat this process for as many cans as you want to use.
  • Use a hole punch to make a hole at the top of each piece.
  • Decorate the aluminum pieces with paint or glue and let dry.
  • Cut six pieces of string or fishing line into equal lengths. Tie a knot at the top of each piece and then thread a bead through the string, leaving enough string at the bottom to attach the aluminum pieces.
  • Thread the string through the hole in the aluminum piece and tie a knot at the bottom to hold it in place.
  • Repeat step 5 for each aluminum piece and then tie all the strings together at the top, leaving a loop to hang the wind chime.
  • Tie a small bell or tin can to the bottom of the wind chime for added sound.

Tips:

  • Make sure to supervise children when using scissors and hole punches.
  • Use different sizes of soda cans to make a unique wind chime.
  • You can also create different shapes with the aluminum pieces, such as butterflies or flowers.

Making a soda can wind chime is an enjoyable and easy DIY project that provides an opportunity to reuse materials that often end up in the trash. The finished product is not only beautiful, but it also adds a whimsical touch to your home or garden. So next time you finish a soda, don't throw the can away – turn it into a fun and creative wind chime instead!

quartzmountain

Picture frames

Picture
Source: www.diyncrafts.com

If you're looking for a fun and creative way to repurpose your soda cans, consider making picture frames! Not only is this a great DIY project, but it's also an eco-friendly way to recycle your cans.

To get started, you'll need a few supplies. First, gather clean soda cans and a pair of scissors or a razor blade. You'll also need a ruler, a cutting mat or cardboard surface to work on, and some glue or tape. Optional supplies include paint, markers, or other decorative elements.

Begin by cutting off the top and bottom of your soda can, using the scissors or razor blade. Make sure to smooth out any rough edges with your fingers or a file. Next, cut the can lengthwise to create a flat piece of metal. Use a ruler to measure out the dimensions of your desired picture frame, and cut the metal accordingly.

Once you have your pieces cut to size, it's time to start assembling the frame. Use tape or glue to attach the four sides of the frame together, overlapping the edges slightly. You can create a simple rectangle or get creative with different shapes and cutouts.

If you want to add some extra flair to your frame, try painting or drawing on the metal with markers or other materials. You could also create designs or patterns by mixing and matching different soda cans.

To finish off your frame, simply add a backing of cardboard or another material to hold your picture in place. You could even use more soda cans to create a backing, or repurpose other materials like scrapbook paper or fabric.

Not only do soda can picture frames look cool and unique, but they're also a great way to showcase photos of your favorite memories or loved ones. Plus, you'll feel good knowing that you're doing your part to reduce waste and help the environment. So get creative and start crafting your own soda can picture frames today!

quartzmountain

Candle holders

Candle
Source: feltmagnet.com

Soda cans can be much more than just a source of refreshment. They can be upcycled into an impressive and cost-effective candle holder. These candle holders create a unique and cool ambiance, and also give a touch of creativity to your living space. In this article, we will show you how to upcycle soda cans into impressive candle holders.

Materials Required:

  • Soda cans
  • Scissors
  • Nail or thumbtack
  • Sandpaper (fine grit)
  • Ruler
  • Tea light candles

Step-by-Step Guide:

Step 1: Rinse and dry the soda cans. Remove the label from the can and make sure it is clean.

Step 2: Using a ruler, measure one to two inches from the bottom of the can and make a mark with a pen. Then, use your scissors to cut the can from the mark. Be careful not to cut yourself.

Step 3: Use sandpaper to smooth out any rough edges on the can after cutting.

Step 4: Using a nail or thumbtack, poke holes in the can to create a design. You can create different designs, including simple dots, stripes and shapes.

Step 5: Insert a tea light candle and light it up. You can group up the soda can candles and place them on a plate to add an aesthetic appeal.

With just a few materials, you can upcycle a soda can and turn it into a cool candle holder. Not only is this an eco-friendly project, it's cost-effective too. By following this step-by-step guide, you can create beautiful candle holders to give your living space a new look. With different designs and patterns, you can have unique decor that reflects your creativity and style. So, collect all your soda cans and get started on this fun project today!

quartzmountain

Bird feeders

Bird
Source: makefuncreating.com

Looking for a fun and upcycled way to bring some wildlife into your backyard? Look no further than making your own bird feeder out of soda cans!

This easy DIY project has the added bonus of reducing waste and creating a sustainable way to attract birds to your yard. Plus, once you get the hang of it, you can customize your bird feeders to match your personal style and decor.

To make a soda can bird feeder, you'll need a few basic supplies. Gather up some soda cans (empty and clean!), a sharp pair of scissors, a hole punch, some twine or string, and birdseed. You might also want to invest in some paint or markers to personalize your feeder.

To get started, give your soda can a thorough wash and rinse, making sure to remove all labels and any sticky residue. Once it's dry, use your sharp scissors to cut two small holes near the top of the can, opposite each other. These holes will be where you thread your twine or string through to create a makeshift handle for hanging.

Next, use your hole punch to make several small holes in the bottom of the can. Be careful not to make the holes too large, as you don't want all the birdseed to fall out at once!

Now comes the fun part: decorating your bird feeder. You can paint the can, add stickers or decals, or even use markers to draw your favorite birds or flowers on the surface. Get creative and have fun with it!

Once your feeder is decorated, fill it up with birdseed and attach your twine or string through the holes at the top. Choose a sturdy branch or hook to hang your feeder on, making sure it's in a spot where you can easily observe the birds that come to visit.

Not only is making a soda can bird feeder a fun and sustainable project, but it also helps support local bird populations. By providing a reliable source of food, you're helping to attract and nourish a variety of different species of birds in your area.

So why not give it a try? Next time you're looking for a new and exciting DIY project, consider making your own soda can bird feeder and inviting some feathered friends into your backyard.

quartzmountain

Coasters

Coasters
Source: www.instructables.com

Soda cans are ubiquitous in today's world. While some people simply discard them after use, others take them as a resource for crafts. One such craft that you can make with soda cans is coasters. Coasters are often made with cork or plastic; however, soda can coasters are a unique and environmentally-friendly option. The following are the steps you can follow to make soda can coasters for your home.

Step 1: Gather Your Materials

To make soda can coasters, you will need the following materials:

  • Sodas cans
  • Scissors or a rotary cutter
  • Ruler
  • Pen or marker
  • Mod Podge or glue
  • Foam brush
  • Cork or felt sheets

Step 2: Cut the Cans

Once you have gathered all necessary materials, it is time to prepare the soda cans for the coasters. Using scissors or a rotary cutter, carefully cut off the top and bottom of the cans, leaving the center portion intact. Cut this center portion vertically to create a rectangular piece of aluminum.

Step 3: Cut the Coasters

Using a ruler and pen/marker, measure and mark out squares or circles on the rectangular piece of aluminum. You can make coaster sizes of your choice depending on personal preferences. Once you have marked out the size and shapes of the coaster, cut them out using scissors or a rotary cutter.

Step 4: Apply Mod Podge/Glue

Before attaching the soda cans to the cork/felt sheets, apply Mod Podge or any strong adhesive on the bottom of the coaster. Doing this helps the coaster stick to the cork/felt and minimizes slipping. Apply a uniform layer of adhesive on the bottom of each coaster.

Step 5: Attach Coaster to Cork/Felt

After applying Mod Podge or glue to the coaster, stick it onto the cork/felt sheet you have already cut out. Press down on the coaster to ensure that it sticks firmly.

Step 6: Finish Up

Once you have attached the coaster to the cork/felt, cut around the coaster, leaving a small margin. This way, you can’t see the edges of the aluminum which may be sharp enough to cause injury. Repeat the process until you have made the desired number of coasters.

In conclusion, making coasters with soda cans is an inexpensive, eco-friendly and an easy process. The resulting coasters have a unique character with a touch of creativity. Instead of throwing soda cans away, use them for this creative project and have unique and cool soda can coasters for your place.

quartzmountain

Pen holders

Pen
Source: www.youtube.com

Soda cans are versatile items that we often use for their intended purpose, but have you ever thought about using them for something else? One creative and useful way to repurpose soda cans is by transforming them into pen holders.

To create a pen holder from a soda can, you first need to gather your materials. All you need is a clean soda can, scissors, and a ruler. You may also want to use markers or paint to decorate the can.

Begin by removing the top of the soda can with a pair of scissors. Be sure to use caution when cutting, as the edges may be sharp. Next, measure and mark off the desired length of the pen holder with a ruler. This will depend on the number of pens or pencils you want to store in the holder.

After you have marked off the length, use the scissors to cut along the line. Smooth out any rough edges by carefully running the scissors along the cut end. Rinse out the can to remove any remaining soda residue.

If you want to add some personality to your pen holder, use markers or paint to decorate the exterior of the can. You could add patterns, your name, or even your favorite quote.

Once your pen holder is complete, it's time to put it to use. Place it on your desk, and fill it with pens, pencils, markers, or even small scissors. This will keep your writing utensils neatly organized and easily accessible, which can be especially helpful when working on an important project.

In addition to being a practical storage solution, a soda can pen holder can also be an eco-friendly option. By repurposing something that would otherwise be thrown away, you're reducing waste and helping the environment.

Overall, creating a pen holder from a soda can is a fun and easy DIY project that can be completed in just a few minutes. Plus, the end result is a useful and personalized item that can help keep your workspace organized. So, the next time you finish a can of soda, don't throw it away – transform it into a useful pen holder instead!

quartzmountain

Refrigerator magnets

Refrigerator
Source: www.etsy.com

Soda cans seem to be everywhere we turn. And if you're someone who enjoys carbonated beverages, then you probably go through quite a few of these cans each week. Rather than just tossing them in the recycling bin, why not consider creating something practical and useful out of them? One easy and fun project is creating refrigerator magnets using soda cans. Here are some tips to get you started:

Materials Needed:

  • Empty soda can
  • Scissors or craft knife
  • Ruler
  • Sheet of flat magnets
  • Glue
  • Decorative paper or tape (optional)

Instructions:

  • Start by carefully cutting off the top and bottom of the soda can using scissors or a craft knife. Be sure to use caution when handling the sharp edges of the can.
  • Next, make a vertical cut down the length of the can to create a flat sheet of aluminum. Use a ruler to measure and mark the length you need to cut.
  • Once you have your sheet of aluminum, cut out your desired shape for the magnet. This could be a simple square or rectangle, or a more intricate design like a flower or butterfly.
  • Use decorative paper or tape to cover the aluminum sheet, if desired. This is a great way to add some color and personality to your magnet.
  • Cut a piece of flat magnet to fit the back of your aluminum sheet, and attach it using glue. Let the glue dry completely before using the magnet.
  • Once dry, your new refrigerator magnet is ready to use! These can be great for holding notes, reminders, or photos on your fridge.

Tips:

  • Use caution when cutting the aluminum can to avoid sharp edges.
  • Be sure to let the glue dry completely before using the magnet to avoid it falling off your fridge.
  • Get creative with your designs - you could even make a set of magnets to coordinate with your kitchen decor!

In conclusion, creating refrigerator magnets from soda cans is an easy and practical way to upcycle these household items. With just a few simple steps and some basic materials, you can turn something that would otherwise be thrown away into a useful and unique piece of decor for your home. Give it a try and see what cool designs you can come up with!

quartzmountain

Jewelry

Jewelry
Source: www.youtube.com

Soda cans are a common household item that can be utilized in a variety of ways. One of the coolest ways that soda cans can be repurposed is by using them to make unique and creative jewelry pieces. With a little creativity and a few simple tools, you can transform a mundane soda can into a fashionable piece of jewelry that is sure to turn heads.

Here are some cool things you can do with soda cans to create stunning jewelry pieces:

  • Cut shapes out of the cans – Using scissors or a craft knife, cut shapes out of the soda cans. You can cut out flowers, stars, hearts, or any other shape you desire. Once you have your shapes cut out, you can then attach them to a necklace or bracelet using jump rings or wire.
  • Create embossed designs – To create an embossed design on a soda can, you can use a ballpoint pen or a stylus to trace a pattern onto the can. Apply pressure to the can as you trace the design, creating a raised pattern. You can then cut out the embossed section and attach it to a jewelry piece.
  • Paint the cans – Using acrylic paints, you can decorate the cans with your own unique designs. You can paint hearts, stars, polka dots, or any other design you desire. Once the paint has dried, you can cut out the painted section and attach it to a necklace or bracelet.
  • Create chain maille – One of the coolest things you can do with soda cans is creating chain maille jewelry. Cut the cans into thin strips, flatten them, and then cut them into small rings. These rings can then be used to create intricate chain maille designs for bracelets, necklaces, and even earrings.
  • Create metal stamping designs – Another fun way to use soda cans is to create metal stamping designs. You can use metal stamps and a hammer to create unique designs on the cans. These can then be cut out and attached to jewelry pieces using jump rings or wire.

In conclusion, soda cans can be used in many different ways to create stunning jewelry pieces. From cutting shapes and embossing designs to painting and metal stamping, there are endless possibilities when it comes to creating soda can jewelry. Give it a try and see what unique designs you can come up with!

quartzmountain

Christmas ornaments

Christmas
Source: www.amazon.com

Soda cans are an incredibly versatile material that can be repurposed in many creative ways. One of the most popular ways to use old soda cans is by turning them into Christmas ornaments. Here are some cool ideas for transforming your soda cans into festive decorations that will add some sparkle to your holiday season:

  • Classic Christmas Shapes: Cut off the top and bottom of an empty soda can, and use scissors to cut the aluminum into various shapes, such as stars, snowflakes, or Christmas trees. Use a hole punch to make a small hole at the top of each shape, and then thread a ribbon through the hole to create a hanger. You can also use a permanent marker to draw designs and patterns on the aluminum before cutting it.
  • 3D Ornament Balls: Cut off the top and bottom of an empty soda can, and use scissors to cut the aluminum into thin, flat strips. Tape or glue two strips together in the shape of a cross, and then weave additional strips in and out to create a ball shape. Once you have your ball, add a ribbon hanger and decorate with glitter or paint.
  • Pop Tab Snowflakes: Collect soda can pop tabs and use pliers to bend them into the shape of snowflakes. Once you have several pop tab snowflakes, string them together with thread or fishing line to create a beautiful and unique garland that can be hung on your tree or mantle.
  • Soda Can Angel: Cut off the top and bottom of an empty soda can, and use scissors to cut the aluminum into a shape resembling wings. Next, draw or print a face for your soda can angel and glue it to the center of the wings. Add a small halo made from wire or tinsel, and attach a ribbon hanger to the back of the wings.
  • Upcycled Can Lights: Create string lights by piercing the top and bottom of soda cans, then poking small holes throughout the sides to create a light pattern. Place a small LED light or candle inside the can to create a warm glow.

These are just a few of the many creative ways you can turn your empty soda cans into beautiful Christmas decorations. With some time and imagination, you can make your tree and home uniquely festive this holiday season.

13 Fun Things to Do in Katy, Texas

You may want to see also

quartzmountain

Wall art

Wall
Source: www.etsy.com

If you're looking for a unique and creative way to decorate your walls, consider using soda cans! With just a few simple steps, you can transform these cans into stunning works of art that are sure to impress.

The first thing you'll need to do is gather your materials. You'll need a collection of empty soda cans, a pair of scissors or a utility knife, and some adhesive (such as glue or double-sided tape). You may also want to pick up some paint or decorative paper to add some extra flair to your soda can wall art.

Next, it's time to get to work. Carefully cut open the top and bottom of each can using your scissors or utility knife. Be sure to take your time and work slowly to avoid any injuries. Once you've cut off both ends, flatten the can by pressing down on it with your hands or with a heavy object.

Now comes the fun part – creating your design! You can use the flattened cans to create geometric shapes, animals, or any other design you can imagine. Use your adhesive to attach the cans to your wall, and layer them as needed to add depth and dimension to your artwork.

To add some extra color, consider painting your soda cans before flattening them. You could also cover them in decorative paper or fabric to create a unique textured look. The possibilities are endless, so let your creativity run wild!

Not only is soda can wall art a fun and quirky way to decorate your space, it's also a great way to reduce waste and repurpose old materials. So the next time you finish a can of your favorite soda, don't toss it in the recycling bin – turn it into a piece of art instead!

quartzmountain

Pencil cases

Pencil
Source: feltmagnet.com

If you’re into recycling, or if you need a new pencil case, then look no further than your recycling bin! With a bit of creativity and a few soda cans, you can make a cool, unique pencil case that will impress all of your friends.

To get started, you will need a few things: a clean soda can, a pair of scissors, a ruler, a permanent marker, and some glue. If you want to make it extra unique, you could also use some paint, decorative tape, or other craft supplies.

First, start by cleaning out the soda can with soap and water. Be careful when handling the can, as it can be sharp around the edges. Once it’s clean, use the scissors to cut off the top of the can, just below where the tab is located. This will create an opening that is wide enough to hold your pencils.

Next, use your ruler and marker to measure and mark out where you want to cut the can. You can make it as big or as small as you want, depending on how many pencils you need to carry. Once you have the measurements marked out, use your scissors to carefully cut out the shape. Be sure to smooth down any jagged edges with a bit of sandpaper or a file.

Now that you have the basic shape, it’s time to get creative! You can use paint or decorative tape to add some color and personality to your pencil case. You could also add some stickers, buttons, or other embellishments to make it even more unique. Just make sure to let it dry completely before you start using it.

Finally, once everything is dry, use your glue to attach the lid back onto the can. Be sure to use a strong, durable glue that will hold up over time. Once the glue is dry, your new pencil case is ready to use!

Not only is this a fun and creative way to recycle old soda cans, but it’s also an eco-friendly option that reduces waste. So, next time you finish a can of soda, don’t throw it away – turn it into a cool pencil case instead!

Frequently asked questions

There are many creative and fun things you can do with soda cans! Some ideas include making a homemade birdhouse, creating DIY lanterns, building a soda can flower wreath, or even fashioning a soda can airplane.

To make a soda can birdhouse, you will need a soda can, some twigs and branches, glue, and scissors. Simply cut an entrance hole in the can, cover the can with glue, and apply the twigs and branches in a criss-cross pattern. Let it dry and it will be ready for your feathered friends to move in!

With just a soda can, a sharp tool, and a tea light candle, you can create a variety of different lanterns. One popular method is to punch holes into the can to create a unique pattern or design. You can also cut out larger shapes or create different layers for a multicolored effect.

To make a soda can flower wreath, you will need a metal wreath form, a variety of soda cans, scissors, and hot glue. Cut the soda cans into flower shapes, and then attach them to the wreath form with the hot glue. Once you have covered the wreath form with your soda can flowers, you can add additional embellishments like ribbons or beads.

Written by
Reviewed by
Share this post
Print
Did this article help you?

3 Comments

SC

Scott Woodard

Wow, this blog post is amazing! I never would have thought there were so many cool things to do with soda cans. One idea that really caught my attention was turning them into adorable lanterns. I love the idea of hanging them up in my backyard during summer nights, creating a magical ambience with just a few cans and some candles. It's such a budget-friendly and fun DIY project that I can't wait to try with my friends. Thanks for sharing these awesome ideas!
Thank you so much for your kind words! I'm thrilled to hear that you found the blog post amazing and that it gave you some new and creative ideas for using soda cans. Turning them into lanterns is definitely a great way to add a magical touch to your backyard during summer nights. It's a budget-friendly and fun DIY project that you can enjoy with your friends. I hope you have a wonderful time creating these adorable lanterns and that they bring a beautiful ambiance to your outdoor space. Thank you for reading and for your lovely comment!
GI

Gianluca Branch

Hey there! I recently stumbled upon this blog post while searching for cool things to do with soda cans, and I'm so glad I found it! I absolutely love the idea of repurposing these cans instead of just tossing them into the recycling bin. One idea that I found particularly interesting was turning them into planters for small succulents or herbs. It's such a creative way to bring some greenery into my apartment without taking up too much space. I can't wait to give it a try and see how it turns out!

Leave a comment