Where To Oil Your Wahl Travel Clipper: A Step-By-Step Guide

where does oil go in a travel wahl clipper

To oil a Wahl travel clipper, you'll need a small cleaning brush, a soft cloth or paper towels, and Wahl clipper oil.

First, turn off and unplug the clipper, then remove the blade by pressing the blade release button and sliding it off. Use the small brush to gently brush the blade and remove any hair or debris. Wash the blade with warm, soapy water, then dry it thoroughly with a clean towel.

Next, turn the clipper on and let it run for a few seconds to warm up the blades. Turn it off and unplug it, then apply a few drops of oil to the blades, focusing on the gap between the top and bottom blades. Be careful not to apply too much oil. Turn the clipper on again and let it run for a few seconds to spread the oil. Use a clean cloth to wipe off any excess.

Finally, store your clipper in a dry place to prevent rusting and damage.

quartzmountain

How to apply oil to the clipper blades

To apply oil to the blades of your Wahl travel clipper, follow these steps:

Clean the Clipper Blades

First, make sure your clipper is turned off and unplugged for safety. Then, remove any built-up hair, dirt, or debris from the blades using a small brush. Wash the blades with warm, soapy water, and dry them thoroughly with a clean towel.

Apply Oil to the Blades

Turn on your clipper and let it run for a few seconds to warm up the blades. Then, turn it off and unplug it again. Apply a few drops of clipper oil to the blades while they are still warm, targeting the small gap between the top and bottom blades. Be careful not to apply too much oil, as this can cause clogging.

Spread the Oil

Turn on the clipper again and let it run for a few seconds to allow the oil to spread evenly. If you notice any excess oil, use a clean cloth to wipe it off.

Store and Maintain the Clipper

Once you've oiled your clipper, store it in a dry place to prevent rusting and damage. Remember to oil your clipper regularly, especially if you use it frequently. Clean your clipper after each use to remove any hair or debris, and keep the blades sharp to ensure a clean cut.

By following these steps, you'll be able to keep your Wahl travel clipper in optimal condition and ensure smooth and efficient performance.

quartzmountain

The importance of oiling the blades

Oil plays a crucial role in maintaining the performance and longevity of your hair clippers. By regularly oiling the blades of your travel Wahl clipper, you can ensure optimal performance and extend its lifespan. Here are several reasons why oiling the blades is essential:

Lubrication

Just like any machine, hair clippers require proper lubrication to function effectively. Oiling the blades of your travel Wahl clipper reduces friction, which can cause wear and tear on the motor and blades. This results in smoother operation and less strain on the clipper, ultimately extending its equipment life.

Cooling

During use, clipper blades can generate significant heat. Applying oil helps dissipate this heat more evenly, protecting both your skin and the blades from excessive temperatures. This ensures a more comfortable grooming experience.

Cleaning

Oiling the blades also aids in removing debris and hair particles that accumulate over time. This regular cleaning helps maintain the performance of your travel Wahl clipper, ensuring it cuts efficiently and comfortably.

Protection

Metal blades are susceptible to rust when exposed to air and moisture. By creating a protective barrier, oil helps prevent rust formation. This not only maintains the cutting performance of your clippers but also reduces the risk of infections in case of accidental cuts.

Smooth Operation

Well-oiled clippers can handle thick and curly hair more effectively, preventing pulling and snagging that may cause discomfort or injury. Regular oiling ensures consistent performance, so your clippers are always ready for use.

Cost Savings

By reducing the need for frequent blade replacements or repairs, regular oiling saves you time and money in the long run. It is a simple maintenance step that makes a significant difference in the durability and functionality of your travel Wahl clipper.

quartzmountain

Materials needed for oiling the clippers

To oil your Wahl travel clippers, you will need:

  • A small brush accessory or cloth to remove any hair from the blades.
  • Clipper oil, such as the Wahl Premium Hair Clipper Blade Lubricating Oil, which is designed for all Wahl electric hair clippers, trimmers, and blades. It can also be used with other brands. This oil helps to reduce friction and heat, prevent rust, and extend the life of the clipper and blades.
  • A small container or tray to catch any excess oil.
  • Cotton swabs or a soft cloth to wipe away any excess oil after oiling.
  • A protective glove to protect your hand from the oil and any sharp edges.
  • Paper towels or a cloth to clean up any spills or messes.

Before oiling, it is important to clean the clipper blades by brushing away or wiping off any excess hair. This will ensure that the oil can properly coat the blades. Then, following the instructions on your clipper oil, place a small drop of oil at the corners of the blade's top and the foot of the blade. Turn on the clippers to help work the oil in. Finally, wipe away any excess oil with a cotton swab or soft cloth.

Mobile Data: On or Off Abroad?

You may want to see also

quartzmountain

Step-by-step guide to cleaning the clippers

To clean your Wahl clippers, you will need a small brush accessory, a clean lint-free towel, and clipper oil.

First, use the brush to remove any hair debris from the blades and clipper base. Then, apply a drop of oil to each corner of the blade's top and the foot of the blade. Turn the clipper on to help work the oil in. Finally, wipe down the clippers with the towel to remove any excess oil.

You should oil your clippers after every 3-4 uses to maintain optimal blade lubrication and prolong their lifespan. This will also help to reduce friction and heat caused by unlubricated blades.

If your clippers are particularly rusty, you can remove the blades using a Phillips-head screwdriver and soak them in 90% isopropyl alcohol for a minimum of 5 minutes before drying them with a towel.

It is important to note that you should not use soap and water to clean your clippers, as this can cause rust.

quartzmountain

How often to oil the clippers

To keep your Wahl clippers in top condition, it's important to oil them regularly. Proper lubrication ensures a smooth, snag-free trim every time. Here's a guide on how often to oil your Wahl clippers:

How Often to Oil Your Wahl Clippers:

  • It is recommended to oil your clipper blades before each use or every few haircuts.
  • For best results, apply a small amount of oil, such as two to three drops, between the blades to maintain optimal blade lubrication.
  • Pay special attention to the corners and edges of the blades, as these areas experience the most friction.
  • Additionally, it is suggested to oil your clippers once a month or as needed. If you notice your clippers overheating, producing a loud noise, or not trimming effectively, it's a sign that they need to be oiled.
  • Regular oiling helps reduce friction and heat, prolongs blade life, and improves the performance of your clippers.
  • Remember to wipe away any excess oil with a soft cloth after application to avoid over-oiling, which can damage the clipper's motor.
  • Besides oiling, proper cleaning and maintenance of your clippers are crucial. Clean your clippers after each use and ensure they are fully charged before use for optimal performance.

Frequently asked questions

The frequency of oiling depends on how often you use the clippers. If you're a professional barber using them daily, oil them at the beginning and end of each day. If you're using them at home, once a week should be enough.

Put a few drops of oil in the small gap between the top and bottom blades. Place a dot of oil on each side of the clipper blade where the top and bottom blade meet (this is called the foot of the blade).

Be careful not to use too much oil, as this can cause the blades to become clogged. Two or three small drops of oil between the blades every few haircuts is enough.

Use oil that is specially formulated for clippers and trimmers, such as Wahl's premium clipper oil.

Oiling your clippers reduces friction and keeps them from pulling and snagging as you cut your hair. It also helps to maintain the life of the blades and prevents rusting.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment